Wifi Doesn’t Have a Valid IP Configuration (Fixes)

The warning code “WiFi doesn’t have a proper IP configuration” is causing problems for a number of customers. The alarm is raised as a consequence of connection strategist checks, which is a logical fit when no internet connectivity is available.

The issue might be caused by a number of things, including the needed WLAN component not operating in the foreground or third-party meddling. Regardless of the severity, we will teach you how to overcome the warning message described above in this post, so simply follow the instructions that we will offer down here.

Error
Error

As it turns out, in this era, having good internet access is essential. The internet connectivity of your system is affected by a number of factors. You won’t be able to access the internet if your wifi doesn’t have a valid IP setup because your device doesn’t have a configuration to access the web.

Before we go through the numerous strategies you may use to get around the above-mentioned error message, let’s go over the various reasons for the problem so you’ll have a better grasp of what’s going on.

How To Fix Wifi Doesn’t Have a Valid IP Configuration

1. Do a Clean Reboot

Launching your system with a fresh boot ensures that no apps interfere with one another and that no third-party clashes create system issues. You can link to the Wi-Fi connection after disabling non-Microsoft services and programs.

On the Windows 10 PC, follow these steps to conduct a fresh boot:

Step 1: On your keypad, tap the Wins + R keys. This will launch the Run application.

Step 2: Push the Enter button on your keypad after typing “msconfig” alone without quote marks. The System Configuration window will open as a result of this.

Step 3: Navigate to the Services panel. Tasked to ensure “Hide all Microsoft services” is picked. You will only view third-party assistance in terms of this.

Step 4: Hit the Stop all option after concealing all network service to temporarily deactivate all third-party programs on your machine.

Step 5: Restart your device after clicking the Apply tab. You’ll now be in a fresh boot condition where only official Microsoft components are operating.

Step 6: Check to see whether you can access the Wi-Fi connection without any problems. If this is the case, one of your third-party programs is tampering with your networks; determine whichever one it is and shut it.

2. Update Drivers

It is imperative that you update your driver software on a regular basis. Network drivers that are out of current might create a lot more problems than you might expect. We’ll use the bundled Device Manager to upgrade the firmware for your network devices in this approach.

Step 1: Select Device Manager from the context panel by pressing the Wins + X buttons on your keypad.

Step 2: Extend the category Network Adapters. Merely double-click the adaptor you’re presently using in this window.

Step 3: To upgrade a driver, go to the Driver panel and tap the Update Driver button.

Step 4: Choose how you want to update your driver. You may either let Windows 10 find a driver for you manual or automated start looking for a new driver file on your machine.

Step 5: Allow time for the driver installation to finish. Reboot your pc after installing the driver to see whether you can access the Wi-Fi without any issues.

3. Rollback Drivers

If the wifi incorrect IP configuration failure is caused by a latest upgrade of the wireless device driver, reverting to the previous version of the driver may assist to resolve the problem. Run the command to do so:

Step 1: Double-click the wireless device in the Device Manager screen.

Step 2: Hit the Roll Back Driver box on the Driver section and continue the on-screen prompts.

4. Uninstall Drivers

A misconfigured network driver may cause the error “WiFi doesn’t have a proper IP configuration.” You can try uninstalling the wifi adapter driver and then letting Windows 10 reinstall it.

Step 1: Go to Device Manager to delete your network adapter driver. Choose “Device Manager” from the search results for “device management.”

Step 2: Find “Network adapters” in the Device Manager window, expand it, then right-click on your wireless device. Then, from the drop-down option, select “Uninstall.”

Step 3: You’ll be prompted to confirm the removal. “OK” should be selected. If you see this option, select “Delete the driver software for this device.”

Step 4: For the changes to take effect, you will have to restart your computer. Check to see whether restarting your computer solved the problem.

5. Disable or Uninstall Antivirus

Antivirus software has a history of causing problems on computers by interfering with internet connections or preventing programmes and services from working correctly. By temporarily stopping your antivirus, you can see whether it’s the source of the “Wi-Fi doesn’t have a proper IP configuration” issue.

Note: This approach is not recommended since using your computer without protection is dangerous. Proceed only if you understand the dangers and have a backup of your system to restore any harm that may occur.

Step 1: Choose Task Manager by right-clicking on an empty spot on your taskbar.

Step 2: If somehow the Task Manager started in compact mode, be sure to click the “Mode information” button to expand the details.

Step 3: By using the header menu at the top of the screen, navigate to the Start-up tab.

Step 4: Find and choose your antivirus programme from the list by clicking on it once.

Step 5: In the bottom-right corner of the window, click the Disable button.

Step 6: Reboot your pc and reconnect to your wireless network.

6. Restore Windows Firewall To Its Default Settings

It’s possible that your IP address isn’t being validated due to a firewall setting error. With a few simple actions, you may return the Windows Firewall to its factory settings.

Step 1: By clicking the magnifying glass symbol in your taskbar, you may access the search bar. You may also use the Windows + S keyboard shortcut to bring it up.

Step 2: From the search results, type firewall and click Check firewall status.

Step 3: Select Restore defaults from the drop-down menu.

Step 4: Before you start, read the cautions. To restore your firewall settings to their normal state, click the Restore defaults option.

Step 5: Yes should be selected. Reconnect to your Wi-Fi network once the settings have been reset to test if it works as expected.

7. Releasing And Renewing IP Address

Using Cmd Prompt to run instructions may be the quickest option to resolve the “WiFi doesn’t have a proper IP setup” issue.

Step 1: To begin, launch Cmd Line by searching for “command prompt” and right-clicking on “Command Prompt”.

Step 2: Simply select “Execute as administrator” to launch it as an administration.

Step 3: Insert “ipconfig /release” in the Cmd Prompt window and hit Enter on the keypad. In the function, ensure there is a gap between “ipconfig” & “/release.”

Step 4: Replace “ipconfig /renew” by “ipconfig /renew”. You must also include a gap following “ipcongif” in this code. Enter the code.

Step 5: To quit Cmd Prompt, write “exit” & hit Enter once you’ve completed inputting the instructions. To check whether this worked, try to reset your pc.

8. Reset TCP/IP Stack

If refreshing your DNS wasn’t sufficient, you might try resetting your TCP/IP. This necessitates the use of the Cmd Prompt &, in some cases, administrator privileges.

Step 1: On your keypad, push the Wins + R keys. This will launch the Run application.

Step 2: Push the Enter key on your keypad after typing “cmd” without the quote marks. The traditional Cmd Prompt programme will be launched as a result of this.

Step 3: To run the instructions, input these in one at a time and hit Enter after every segment:

ipconfig /release
ipconfig /all
ipconfig /renew

Step 4: Keep the Cmd Prompt active that you originally launched. In the order listed, write and conduct the instructions:

netsh int ip set dns
netsh winsock reset

Step 5: Exit the Cmd Prompt & restart your computer after the operations have been properly executed. Inspect if the fault “Wi-Fi doesn’t have a correct IP configuration” still applies.

9. Manually Entering The IP Information

Step 1: Acquire Network Connections from the panel by using the Wins + X key combo.

Step 2: Underneath the Advanced network configurations heading, press the Change adapter options button. On the desktop, a pop-up message should emerge.

Step 3: Hit Properties from the right-click menu on your Wi-Fi adaptor. Authorize the window to activate with administrator access if the User Account Control (UAC) prompts you.

Step 4: Select Internet Protocol Version 4 (TCP/IPv4) and double-hit.

Step 5: Change the “Use the following IP addresses” selection into “Use the following IP addresses,” and thereafter fill in the following digits:

  • IP Address: 192.168.1.# (Substitute # with a digit.)
  • Subnet Mask: 255.255.0
  • Default Gateway: 192.168.1.1

Step 6: Change the setting to “Use the following DNS server addresses,” and thereafter enter the following figures:

  • Preferred DNS server: 8.8.8.8
  • Alternate DNS server: 8.8.4.4

Step 7: Assure that the selection to Confirm modifications upon leaving is selected, then tap the OK icon.

Step 8: This approach may be used to see if your Wi-Fi troubles have been resolved.

10. Check For Infections

It’s also possible that you’re getting this error because of malware or a virus on your computer. Using the built-in Windows Security software to run a malware scan should resolve the problem. There are several scan choices in Windows Security; it is advised that you conduct a ‘Full Check’ to properly scan your machine.

To perform a virus scan, go to the ‘Search’ menu and type in ‘Windows Security,’ then select the correct search result to open the programme.

Step 1: Select the ‘Virus and threat prevention’ option in Windows Security.

Step 2: Since just the ‘Quick scan’ option is now visible, click on ‘Scan choices’ to see the many types of scans available.

Step 3: Select ‘Full Scan’ and then ‘Scan Now’ at the bottom of the page.

Step 4: The scan will begin shortly and will  take time to finish. While the scan is running in the background, you may continue to work on the system. Following the completion of the scan, you will be notified whether any trojan or virus has been found, as well as the action taken.

11. Changing SSID And Password

Changing the SSID and password of your router is another option to repair the “Wi-Fi doesn’t have a correct IP configuration” problem.

Step 1: In a new browser tab, type the gateway IP and click Enter in Chrome, Firefox, or Edge.

Step 2:  Enter the username and password for the router.

Step 3:  Change the SSID and password on the router by sifting through the options. Then save your modifications.

After that, you’ll need to change the SSID and password on your PC’s connection to the router.Don’t forget to update the networks on any connected devices as well.

12. Changing Connection Mode

You should also experiment with the router parameters in addition to changing different network configurations on your PC. The first step would be to change the router’s SSID and password, followed by modifying the Wi-Fi router security from WAP2/WAP3 to WAP/WAP2. It’s possible that this will cause Windows to create a new network, skipping the problem.

Finally, the router should be reset. But first, double-check that you understand how to change the router.

13. Running Troubleshooter

Windows 10 has built-in troubleshooters that help you find and repair problems with your operating system. If you’re having difficulties connecting to the internet, the Network Troubleshooter app might be able to help you out.

Step 1: To access the Start menu, click the Windows symbol in the lower left corner of your screen. Alternatively, press Windows + I to bring up the Settings menu.

Step 2: Select the Network & Internet option from the drop-down menu. The majority of your network settings may be found here.

Step 3: Remain on the Status tab at all times. Scroll down and choose Network Troubleshooter from the drop-down menu.

Step 4: Wait for the troubleshooter to diagnose and detect problems with your machine. To resolve any faults or difficulties discovered by the troubleshooter, follow the on-screen instructions.

It’s conceivable that the troubleshooter will not be able to find any issues. This is a regular occurrence, since most troubleshooters only look for a restricted range of faults and can’t help you if yours isn’t one of them.

Also Read:

  1.  KimCartoon

2. VIPleague

Conclusion

Your internet connection will be restored as a result of the foregoing modifications, and you will be able to visit your favourite websites once more. Also, unless you know the specific problem and are able to identify the repair in the article, applying the fixes in the order they are presented will help you rapidly resolve the mistake.