If you’re trying to stream material from your Roku and you see the message “Roku Error Code 009,” there’s either a problem with the internet connection or the device itself (such as a disconnection or authentication error).
Why Does My Roku Keep Giving Me a “Error Code 009”?
Cache DNS: The cached DNS settings used by the Router to establish an internet connection may get damaged under certain circumstances. Due to the fact that some DNS servers are blocked, the connection establishment procedure may be stymied.
Getting Online: If Roku has trouble connecting to its database, it may be because your internet connection frequently times out. You’ll need a reliable and fast internet connection to use the service for streaming videos and other media.
Adjusting the Settings on Your Device: On occasion, the gadget’s internal workings cause it to be unable to establish a proper connection with the servers. It’s possible that a bug in the operating system is to blame for these underlying problems. Over time, the system software could get corrupted, reducing its effectiveness.
Method 1: Power Cycling Devices
The launch settings may be corrupted or there may be a dispute between them that is causing the error. Therefore, we will be performing a power cycle on the devices in this phase to flush the cached information. This will also flush the router’s DNS cache. Because of this,
Step 1: All devices concerned should have their power cords removed from the wall.
Step 2: For at least 15 seconds, press and hold the “Power” button on the gadgets.
Step 3: To turn them back on, simply plug in the power wire and toggle the switch.
Step 4: Let the gadgets boot up completely before seeing if the problem persists.
Method 2: Modifying Network Settings Back to Default
Due to a possible corruption in the Roku network settings, the device’s capabilities may be restricted. As a result, we’ll be resetting the network settings here. That can only be accomplished if:
Step 1: To access your Roku library, launch the software and enter your login details.
Step 2: Select “System” from the menu that appears.
Step 3: If you want to reset your network connection, choose “System Restart” in the following screen.
Step 4: Devices will restart themselves after being reset.
Step 5: After powering on the device, go to “Settings” and then “Network.”
Step 6: Access the “Setup a New Wifi Connection” menu by clicking the “Wifi” tab.
Step 7: To connect to your home network, first choose the network you wish to use, and then click the “I am at home” button.
Step 8: When prompted for a password, select “Automatic” across all remaining fields.
Step 9: After the link is established, see if the problem still exists.
Method 3: Modifying Program Settings
The software itself could be corrupted, causing the error message to appear. This is why we are going to reset the programme to its original settings now. To that end:
Step 1: To access your Roku library, launch the software and enter your login details.
Step 2: Go to the menu and select “System.”
Step 3: Choose “System Restart” then “Factory Reset” at the following screen.
Step 4: Hold off on making any further judgements until the device has finished restarting.
